Expansion chamber

Expansion chambers are mainly used in exhaust systems of motorcycles, the two-stroke engines. The main purpose of expansion chambers, the power and the power to improve the two-stroke engines. Using an expansion chamber could easily be the performance, efficiency and performance of four-stroke engines. Through the use of residual energy of the burned exhaust the supply from the cylinder, provides the additional amount of power, there is a recycling processUsing energy from the power remaining in the exhaust gases.

The main components of an expansion chamber consisting mainly of blow down the door section and a section of the transfer block. In a two-stroke when the piston moves down, the fuel is being pushed by his own cutting and pressure in a pipe with constant diameter and the tube is the first part of the expansion chamber provided in the exhaust system. This tube is called the end of the tube expansionChamber of motorcycle exhaust system. It is kept constant diameter, because the gas available power is kept constant, which is ultimately through the implementation cycle of the expansion chamber. The drive section has a diffuser with a different form. The exception to this speaker is shaped divergent angle in a ratio 6:00 to 12:00, allowing the motion to increase the exhaust gas. These divergent section of the drive section drives the gas discharge in the portsection block. Port blocking section is convergent in shape with an angle of about 8 to 60 degrees depending on the needs of the engine. Therefore, this part of the convergent motorcycle exhaust system pushes the fresh gas in the cylinder just before the compression cycle of the piston at high pressure. This type of exhaust system is also composed of a puncture, which is used to control the output of exhaust gases and improve the Printing GuideExhaust gas. The different solutions needed to complete the construction of the expansion chamber, the process of forming a hand hydroforming process and the method of drilling.

Exhaust System

Since the steering tube of the expansion chamber of the motorcycle has the most sweet and hot exhaust port blocking, and the different sections of the expansion chamber temperature changes and extreme Ass sound variations. These factors of the exhaust system may affect the durability and performance of the twoStroke engines. This type of exhaust system may have an impact on the performance of two-stroke two-stroke motorcycles. Due to the large size and shape of the expansion chamber, it is usually on stones, rocks, woods and other fixed obstacles on the ground and is exposed to the surroundings. Thus, the expansion chamber exhaust system to maintain conditions of effective and regular maintenance and service.

Although the use of expansion chambersexhaust systems of two-stroke motorcycles have tried many of the problems of everyone to get one, get the power of four-stroke engines. This type of exhaust system on the market at affordable prices that can be easily installed in all types of two-stroke engines.

Expansion chamber

kuhn rikon pressure cooker recipes rc helicopter beginner guide