Friday, October 21, 2011

Marine Diesel Engine Maintenance

Marine Diesel Engine Maintenance

Exhaust System

In a conventional marine diesel engine the power is produced by hot compressed air igniting fuel sprayed under very high pressure into the cylinder head. A marine diesel engine does not use a carburetor to mix fuel and air or spark plugs to ignite the mixture. Instead it employs the pistons to compress the air to 3000 kPa which causes it to become extremely hot and the fuel is ignited as soon as it is injected into the cylinder.

Some marine diesel engines are fitted with a heater plug in the inlet manifold or a glow plug in the pre-combustion chamber of each cylinder to provide additional heat to the combustion air during starting.

Diesel engines are heavier and slower revving than petrol engines but they are also more reliable because they do not rely on external carburetion or an electrical spark for ignition.

Newer engines use an electronic fuel injection system whereby fuel and air are mixed more thoroughly in the pre-combustion chamber before entering the cylinder. This system maximizes power and fuel economy and is also less polluting.

Every boater should have an understanding of how their engine works so let's start by explaining the mechanical cycles.

Most reciprocating piston internal combustion engines work on one of two mechanical cycles-either the four-stroke cycle or the two-stroke cycle. These cycles designate, in correct sequence, the mechanical actions by which the fuel and air gain access to the engine cylinder, the gas pressure - due to combustion - is converted to power and, finally, the burnt gas is expelled from the engine cylinder.

The Basic Four-Stroke Diesel Engine

From its name, it is obvious there are four strokes in one complete engine cycle. A stroke is the movement of the piston through the full length of the cylinder and - since one such movement causes the crankshaft to rotate half a turn - it follows that there are two crankshaft revolutions in one complete engine cycle.

The four strokes in the order they occur are:

1. Inlet stroke. With the inlet valve open and the exhaust valve closed, the piston moves from top dead center (TDC) to bottom dead center (BDC), creating a low-pressure area in the cylinder. Clean, filtered air rushes through the open inlet valve to relieve this low-pressure area, and the cylinder fills with air.

2. Compression stroke. With both valves closed, the piston moves from BDC to TDC, compressing the air. During this stroke the air becomes heated to a temperature sufficiently high to ignite the fuel.

3. Power stroke. At approximately TDC, the fuel is injected, or sprayed, into the hot, compressed air, where it ignites, burns and expands. Both valves remain closed, and the pressure acts on the piston crown, forcing it down the cylinder from TDC to BDC.

4. Exhaust stroke. At approximately BDC the exhaust valve opens and the piston starts to move from BDC to TDC, driving the burnt gas out of the cylinder through the open exhaust valve.

The Two-Stroke Diesel Engine

The two-stroke engine uses two piston strokes to complete one power stroke and, therefore, fire twice as often as a four-stroke engine. A two-stroke engine is smaller and simpler with fewer moving parts. A two-stroke engine has the potential to produce twice as much power as a four-stroke engine of the same size, however, because of the extra fitting required in a two-stroke diesel engine, for example blowers and governors, they become more expensive to produce. There has been a shift towards four stroke diesel engines which have become more efficient and smaller.

Protect Your Marine Diesel Engine

Protect your engine by avoiding long periods (more than 10 minutes) of idling in a "no-load" situation. This is often done to charge batteries or cool refrigeration but if done repeatedly it will glaze the bores of the engine and cause premature engine failure. If the vessel is in a berth the engine can be put in gear to create load at idle.

All boat owners should have an understanding of basic marine diesel engine maintenance to keep themselves and their families safe on the water.

widescreen portable dvd player shinco portable dvd player cuisinart pure indulgence ice cream maker

Intakes, Exhausts, and Performance Chip Benefits in a Nutshell

Intakes, Exhausts, and Performance Chip Benefits in a Nutshell

Exhaust System

Whether you like spirited driving around town or you're a weekend autocross warrior, the more power your engine makes, the better your driving experience. Almost all vehicles have restrictions in their intake and exhaust systems and these are two areas of focus that most car enthusiasts concentrate on first. It's important to note that modifying your engine to create more power can cause additional wear and tear on the engine, but the effects of changing an air intake and exhaust system are usually minimal. It is for this reason that most car enthusiasts focus on these parts first.

A restrictive intake can choke your engine by not letting it breathe. Many manufacturers design the intake to be restrictive to help limit the horsepower output and save additional funds on the cost of producing the vehicle. This is one measure they take to ensure the longevity of the engine. Installing a high flow air intake system is typically an easy modification that most people can accomplish within one to two hours using minimal tools; a screwdriver, a few wrenches and some sockets are usually all that's needed. The power gains you can get from an air intake can be small or quite large, depending on your engine. The extra power comes from two things; better flow dynamics from larger and smoother intake tubes, and from drawing in cooler air for the engine to use for combustion. The larger intake tubes let your engine breathe easier; it's like you trying to breathe through a small straw or a big tube. Obviously it's easier to breathe through the big tube. Since air is a vital part of the combustion process, the more air you can get into a cylinder, the more fuel you can add and the more power you can make. And because cold air is denser than warm air, an air intake system helps the engine make additional power by drawing in air from outside the hot engine bay.

Believe it or not, an exhaust system also helps the engine breathe. Imagine trying to exhale through a small straw. Now imagine the same thing, but through a big tube this time. Which one was easier to exhale through? The big tube! This is the same principal that applies an engines exhaust system. The bigger the exhaust system, the less work the engine has to do to push out spent exhaust gasses. Exhaust systems vary in length and can sometimes replace the catalytic converters to help improve exhaust gas flow. Depending on how your factory exhaust was designed, replacing it with a higher flow exhaust system can create additional horsepower, usually quite a lot more on turbocharged vehicles.

The final engine modification commonly done by car enthusiasts is using a performance chip or power programmer. These chips retune the engine to maximize horsepower and torque. Power gains can be had on stock vehicles, but even more power can be had from combining a performance tuner with other power modifications. This is because your factory ECU doesn't know about the cold air intake or exhaust system you installed, but the performance tuner can let your engines computer know about these new parts you installed. It is not uncommon to get 20+ horsepower when you combine a performance chip with a CAI and exhaust system.

monitor kerosene heater

Thursday, October 20, 2011

2007 Dodge Charger SRT8/ Corsa Exhaust

2007 Dodge Charger SRT8/ Corsa Exhaust On YouTube.





This is my 2007 Dodge Charger SRT8 with new Corsa Exhaust and hi-flow cats from Flowmaster. The Charger also has a Diablosport Predator tune and Mopar CAI. It took me a LONG time to figure out what type of exhaust I wanted and I finally went with Corsa. I made this video to show everyone what the exhaust sounds like on the car. ENJOY!

Tags: dodge charger srt8, srt8, srt-8, man's last stand, corsa, exhaust, muffler, flowmaster, diablosport predator, speeding, to fast, hemi 6.1, dodge, mopar cai, hi-flow cats, SRT8 Supercharged, Supercharger, Blown, Blower, Boost, Procharger, Mopar, Charger, Magnaflow, Cam, Kooks Headers, Ported Throttle Body, Diablo Sport Programmer, Tune, Test Run, Nitto, Drag Radial, Idle, Fuel Pump, Dyno Tuned, Intercooler, Intercooled ATI Damper

Rock Tumbler Media

Wednesday, October 19, 2011

Borla 140036 Cat-Back Exhaust System

Borla 140036 Cat-Back Exhaust System Review


List Price : $1,134.99


Sale Price : $851.95


Availibility : Usually ships in 24 hours



Borla 140036 Cat-Back Exhaust System Feature

  • Made of corrosion resistant aircraft quality stainless steel which decreases the fatigue incurred on these parts during high performance uses
  • BORLA uses patented straight-through and multi-core technology to help increase horsepower and torque.
  • Precision manufactured using aircraft-quality stainless steel, guaranteed to look like new for one million miles.
  • Includes a split side exit single round rolled angle-cut lined resonated tip

Borla 140036 Cat-Back Exhaust System Overview

Borla's T-304 stainless steel high performance exhaust system is built to last under extreme conditions. Borla exhaust systems give you more power and torque, longer engine life, precision fit, and the distinctive "BORLA Sound of Power" recognized by automotive enthusiasts around the world.

Ozark Trail Sleeping Bag ice cream maker krups patonga camping

Muscle Mass Routine For Bodybuilding Using The Pyramid System

Muscle Mass Routine For Bodybuilding Using The Pyramid System

Exhaust System

Most Muscle Mass Routine Systems today are complicated and consists of many sets. The pyramid system is fairly straight forward and is based on an easy concept of increasing your weight every week. It can be implemented into any of the basic exercises requiring weights.

Start by picking a weight that you can handle for about 12 reps for your first set. The second set will be a rep range of 10 and an increase in weight. The weight increase will be determined on what your limits are with that particular exercise. For the third set, your rep range will be 8 reps with an increase in weight. Your final set of reps / lbs will consist of 6 reps with your highest weight. An example of this pyramid mass routine would look like this...

12 reps/ 100 10 reps/ 120 8 reps/ 140 6 reps/ 160

Notice the reps decrease and the weight increases. Make sure you adopt this to your level. Here is what I mean, you do not have to start out with 12 reps. You can start out with 10 or 15 and decrease your reps however you feel fit.

The same with the weight, it doesn't have to increase by an increment of 20s. It can increase by more or less, depending on how strong you are. And, you are not limited to 4 sets. You can do 5 or even as little as 3. It will all depend on how long you have been weight lifting and how strong you are with that particular exercise.

After you have this rhythm down for the pyramid mass routine, you will want to increase your weight every week. I recommend increasing it by increments of 5 lbs per week.

Let's take the above pyramid routine as an example of your first week performing this system. Your next week of reps / lbs will look like this...

12 reps/ 105 10 reps/ 125 8 reps/ 145 6 reps/ 165

One simple trick to really exhaust your muscles is to hit the last set with your heavy weight, reverse the order and descend backwards. This will totally fatigue your muscle and you will feel a good pump.

Only add this descending set pyramid mass routine after you have performed the regular pyramid system for a few months. An example of this descending set pyramid will look like this...

12 reps/ 100 10 reps/ 120 8 reps/ 140 6 reps/ 160 8 reps/ 140 10 reps/ 120 12 reps/ 100

You should take a rest of about 60 to 90 seconds between the 1st set through the 4th set. Then from the 4th through 7th sets, do not take any breaks and just continue once you have stripped the weight from the bar. Also, if you can not do the full amount of reps recommended, that's alright. Just do as many as you can with good form while doing the pyramid mass routine and continue to the next set.

table bbq grill waterproof camera disposable wicker bike basket

Tuesday, October 18, 2011

The Borla Exhaust Review

The Borla Exhaust Review

Exhaust System

I have presented you with this Borla exhaust review to inform you how this exhaust system stacks up through the thoughts of previous customers who have chosen to buy the Borla exhaust. I hope you find it useful in your quest to find the right system for you and your vehicle.

Borla Performance Industries is known as a leader in the design and production of stainless steel performance exhaust. The company began twenty years ago and has now developed to become the leading exhaust producer of today's street performance vehicles, as well as off-road and racing performance vehicles.

Borla Performance Industries is committed and commended on giving world class exhaust products which go beyond the anticipations of their customers. The performance benefits of the Borla exhaust are widely distinguished. Borla performance exhausts make use of vehicle-specific engineering to give utmost performance and an unambiguous tone. The company prides itself in promoting the features of their performance exhaust which include:

- Exhaust systems which are specially crafted for your particular vehicle.

- Exhaust systems and mufflers that create the utmost exhaust flow as well as the unique Borla sound of power.

- The mandrel-bent tubing gets rid of most back-pressure and gives an even exit for exhaust gasses.

- Free-flowing Borla exhaust boost and improves horsepower and torque and can also improve fuel economy.

- Borla kits feature their copyrighted multi-core and straight-through muffler designs.

- They are set up straight to your vehicle's factory-exhaust mounting locations.

- All their kits consist of the necessary clamps, connectors and hardware-everything that you will require in order for you to have a hassle-free installation.

- Every system is extensively adjusted and tested to give excellent vehicle performance.

- Borla Cat-Back exhaust systems are street authorized in all of the 50 states of the United States of America and will not invalidate your vehicle's factory warranty.

- The Borla Cat-Back performance exhaust system is supported by Borla's Million-Mile Warranty

As for Customer Reviews for these exhaust systems, more than two hundred customer respondents gave positive reviews for the product. Overall, these are the reviews that were given for the Borla exhaust:

-Customers say the exhaust is excellent when it came to appearance.

-Many people said it is very good when it came to ease of installation.

-A lot of people mentioned the exhaust system is very good both in quality and in value.

The only negative point that was said about the Borla exhaust system is that it is a little too pricey. The price would make one consider if the product will actually be worth the money. This was justified by the company though. They reasoned that a Borla exhaust is more expensive as compared to other traditional mufflers because it is made of stainless steel. This stainless steel structure will also be the reason why this particular exhaust system will have greater durability and endurance than other performance exhaust systems. With the product also comes its million-mile warranty which would assure its customers that they will get their money's worth with the Borla exhaust.

This system has been tested and proven by customers who have purchased it. The vast majority all concur that this exhaust lived up to their expectations and found it well worth the money they paid.

I hope you found the Borla exhaust review a valuable source of information while trying to decide on an exhaust that is worthy of you and your vehicle.

protactic golf clubs camera tripods best thai food san luis obispo

Aaron Easter testing an SV650 at Almeria

Aaron Easter testing an SV650 at Almeria Video Clips.





Aaron Easter's first ride on the GO Racing/TDHeating SV650 Minitwin. 3 day Test at Almeria, Spain, Feb 2010. 2003 SV650, Ohlins Rear Shock, re-worked front forks, full Hindle exhaust system, MIchelin Power One Tyres, standard road engine

Keywords: Minitwins, Suzuki, SV650, Aaron, Easter, Azman, MRO, Racing

aboveground pools